ZyXEL Communications Network Router NOT AVAILABLE Manual de usuario descargar pdf (Pagina 87)

Chapter 9 Wireless LAN Profiles

NXC CLI Reference Guide

9.4.1 Security Profile Example

The following example creates a security profile with the name ‘SECURITY01’..

9.5 MAC Filter Profile Commands

The following table identifies the values required for many of these commands. Other input

values are discussed with the corresponding commands.

eap {external | internal auth_method} Sets the 802.1x authentication method.

[no] server-auth <1..2> activate Activates server authentication. Use the no parameter to

deactivate.

server-auth <1..2> ip address

ipv4_address port <1..65535> secret

secret

Sets the IPv4 address, port number and shared secret of

the RADIUS server to be used for authentication.

[no] server-auth <1..2> Clears the server authentication setting.

exit Exits configuration mode for this profile.

Table 35 Command Summary: Security Profile (continued)

COMMAND DESCRIPTION

Router(config)# wlan-security-profile SECURITY01

Router(config-security-profile)# mode wpa2

Router(config-security-profile)# wpa-encrypt aes

Router(config-security-profile)# wpa-psk 12345678

Router(config-security-profile)# idle 3600

Router(config-security-profile)# reauth 1800

Router(config-security-profile)# group-key 1800

Router(config-security-profile)# exit

Router(config)#

Table 36 Input Values for General MAC Filter Profile Commands

LABEL DESCRIPTION

macfilter_profile_name The MAC filter profile name. You may use 1-31 alphanumeric

characters, underscores (

_), or dashes (-), but the first character

cannot be a number. This value is case-sensitive.

description2 Sets the description of the profile. You may use up to 60

alphanumeric characters, underscores (

_), or dashes (-). This value

is case-sensitive.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 299 300

Sin comentarios

ZyXEL Communications Network Router NOT AVAILABLE Manual de usuario Pagina 87