ZyXEL Communications Network Router NOT AVAILABLE Manual de usuario descargar pdf (Pagina 273)

Chapter 43 Managed AP Commands

NXC CLI Reference Guide

273

43.3.1 CAPWAP Client Commands Example

This example shows how to configure the AP’s management interface and how it connects to

the AP controller (the NXC), and check the connecting status. The following commands:

• Display how the AP finds the NXC

• Set the AP’s management IP address to 192.168.1.37 and netmask 255.255.255.0

• Set the AP’s default gateway IP address to 192.168.1.32

• Sets the AP’s management interface to use VLAN ID 2 and send tagged packets

• Specifies the primary and secondary IP addresses of the NXC (192.168.1.1 and

192.168.1.2) to which the AP connects.

• Displays the settings it configured

Router# configure terminal

Router(config)# show capwap ap discovery-type

Discovery type : Broadcast

Router(config)# capwap ap vlan ip address 192.168.1.37 255.255.255.0

Router(config)# capwap ap vlan ip gateway 192.168.1.32

Router(config)# capwap ap vlan vlan-id 2 tag

Router(config)# capwap ap ac-ip 192.168.1.1 192.168.1.2

Router(config)# show capwap ap discovery-type

Discovery type : Static AC IP

Router(config)# show capwap ap ac-ip

AC IP: 192.168.1.1 192.168.1.2

Router(config)# exit

Router# show capwap ap info

AC-IP 192.168.1.1

Discovery type Static AC IP

SM-State RUN(8)

msg-buf-usage 0/10 (Usage/Max)

capwap-version 10118

Radio Number 1/4 (Usage/Max)

BSS Number 8/8 (Usage/Max)

IANA ID 037a

Description AP-0013499999FF

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 299 300

Sin comentarios

ZyXEL Communications Network Router NOT AVAILABLE Manual de usuario Pagina 273