ZyXEL Communications Network Router NOT AVAILABLE Manual de usuario descargar pdf (Pagina 78)

Chapter 9 Wireless LAN Profiles

NXC CLI Reference Guide

The following table describes the commands available for radio and monitor profile

management. You must use the

configure terminal command to enter the configuration

mode before you can use these commands.

wlan_hctw Sets the HT channel width. Select either auto or 20m.

wlan_htgi Sets the HT guard interval. Select either long or short.

wlan_2g_basic_speed Sets the basic band rate for 2.4 GHz. The available band rates are

1.0, 2.0, 5.5, 11.0, 6.0, 9.0, 12.0, 18.0, 24.0,

36.0, 48.0, 54.0.

wlan_2g_support_speed Sets the support rate for the 2.4 GHz band. The available band rates

are: 1.0, 2.0, 5.5, 11.0, 6.0, 9.0, 12.0, 18.0, 24.0,

36.0, 48.0, 54.0.

wlan_mcs_speed Sets the HT MCS rate. The available rates are: 0, 1, 2, 3, 4, 5,

6, 7, 8, 9, 10, 11, 12, 13, 14, 15.

wlan_5g_basic_speed Sets the basic band rate for 5 GHz. The available band rates are: 6.0,

9.0, 12.0, 18.0, 24.0, 36.0, 48.0, 54.0.

wlan_5g_support_speed Sets the support rate for the 5 GHz band. The available band rates are:

6.0, 9.0, 12.0, 18.0, 24.0, 36.0, 48.0, 54.0

chain_mask Sets the network traffic chain mask. The range is 1 ~ 7.

wlan_power Sets the radio output power. Select 100%, 50%, 25%, or 12.5%.

scan_method Sets the radio’s scan method while in Monitor mode. Select manual or

auto.

wlan_interface_index Sets the radio interface index number. The range is 1 ~ 8.

ssid_profile Sets the associated SSID profile name. This name must be an existing

SSID profile. You may use 1-31 alphanumeric characters, underscores

(

_), or dashes (-), but the first character cannot be a number. This value

is case-sensitive.

Table 30 Input Values for General Radio and Monitor Profile Commands (continued)

LABEL DESCRIPTION

Table 31 Command Summary: Radio Profile

COMMAND DESCRIPTION

show wlan-radio-profile {all |

radio_profile_name}

Displays the radio profile(s).

all: Displays all profiles for the selected operating mode.

radio_profile_name: Displays the specified profile for

the selected operating mode.

wlan-radio-profile rename

radio_profile_name1 radio_profile_name2

Gives an existing radio profile (radio_profile_name1)

a new name (radio_profile_name2).

[no] wlan-radio-profile

radio_profile_name

Enters configuration mode for the specified radio profile.

Use the no parameter to remove the specified profile.

[no] activate Makes this profile active or inactive.

role wlan_role Sets the role of this profile.

rssi-dbm <-20~-76> When using the RSSI threshold, set a minimum client

signal strength for connecting to the AP. -20 dBm is the

strongest signal you can require and -76 is the weakest.

[no] rssi-thres Sets whether or not to use the Received Signal Strength

Indication (RSSI) threshold to ensure wireless clients

receive good throughput. This allows only wireless clients

with a strong signal to connect to the AP.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 299 300

ZyXEL Communications Network Router NOT AVAILABLE Manual de usuario Pagina 78

Comentarios a estos manuales

ZyXEL Communications Network Router NOT AVAILABLE Manual de usuario Pagina 78

Comentarios a estos manuales

Relacionado con productos y manuales para Software ZyXEL Communications Network Router NOT AVAILABLE