ZyXEL Communications Network Router NOT AVAILABLE Manual de usuario descargar pdf (Pagina 85)

Chapter 9 Wireless LAN Profiles

NXC CLI Reference Guide

The following table describes the commands available for security profile management. You

must use the

configure terminal command to enter the configuration mode before you

can use these commands.

wpa_key Sets the WPA/WPA2 pre-shared key in ASCII. You may use 8~63

alphanumeric characters. This value is case-sensitive.

wpa_key_64 Sets the WPA/WPA2 pre-shared key in HEX. You muse use 64

alphanumeric characters.

secret Sets the shared secret used by your network’s RADIUS server.

auth_method The authentication method used by the security profile.

Table 34 Input Values for General Security Profile Commands (continued)

LABEL DESCRIPTION

Table 35 Command Summary: Security Profile

COMMAND DESCRIPTION

show wlan-security-profile {all |

security_profile_name}

Displays the security profile(s).

all: Displays all profiles for the selected operating mode.

security_profile_name: Displays the specified

profile for the selected operating mode.

wlan-security-profile rename

security_profile_name1

security_profile_name2

Gives existing security profile

(security_profile_name1) a new name,

(security_profile_name2).

[no] wlan-security-profile

security_profile_name

Enters configuration mode for the specified security

profile. Use the no parameter to remove the specified

profile.

[no] mac-auth activate MAC authentication has the AP use an external server to

authenticate wireless clients by their MAC addresses.

Users cannot get an IP address if the MAC authentication

fails. The no parameter turns it off.

RADIUS servers can require the MAC address in the

wireless client’s account (username/password) or Calling

Station ID RADIUS attribute. See Section 24.2.4.1 on

page 173 for a MAC authentication example.

mac-auth auth-method auth_method Sets the authentication method for MAC authentication.

mac-auth case account {upper | lower} Sets the case (upper or lower) the external server

requires for using MAC addresses as the account

username and password.

For example, use mac-auth case account upper

and mac-auth delimiter account dash if you

need to use a MAC address formatted like 00-11-AC-01-

A0-11 as the username and password.

mac-auth case calling-station-id

{upper | lower}

Sets the case (upper or lower) the external server

requires for letters in MAC addresses in the Calling

Station ID RADIUS attribute.

mac-auth delimiter account {colon |

dash | none}

Specify the separator the external server uses for the

two-character pairs within MAC addresses used as the

account username and password.

For example, use mac-auth case account upper

and mac-auth delimiter account dash if you

need to use a MAC address formatted like 00-11-AC-01-

A0-11 as the username and password.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 299 300

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications Network Router NOT AVAILABLE Manual de usuario Pagina 85

Comentarios a estos manuales

Relacionado con productos y manuales para Software ZyXEL Communications Network Router NOT AVAILABLE