ZyXEL ACCESSING INTERNET & INTRANET omni series Manual de usuario Pagina 96
- Pagina / 168
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
84 Advanced ISDN Call Control
of these "internal terminals" can be assigned one EAZ using the
command AT&ZIn=m, where n=0-7 and m= 0-9.
Command Function
&ZI0=m assigns EAZ for X.75.
&ZI1=m assigns EAZ for V.110.
&ZI2=m assigns EAZ for V.120.
&ZI3=m assigns EAZ for PPP, MPPP.
&ZI4=m assigns EAZ for ISDN data, protocol auto-
detection.
&ZI5=m assigns EAZ for PPP, MPPP.
&ZI6=m assigns EAZ for Phone 2 (omni.net).
&ZI7=m assigns EAZ for Phone 1 (non-data).
The default EAZ of each protocol is as follows:
• &ZI0=1 - for Data.
• &ZI4=2 - for Data.
• &ZI6=3 - for the analog adapter, Phone 2 (omni.net).
• &ZI7=4 - for the analog adapter, Phone 1 (non-data).
AT&ZI? can be used to display the EAZ numbers assigned by the
AT&ZIn=m commands.
The EAZ (last digit) of the destination address in an incoming
SETUP message will be checked with each protocol's EAZ. If there
is a match and the service indicated is compatible with this protocol,
the call will be accepted using the protocol.
O
NOTE: EAZs must be assigned in exact order.
The suffix digit to an ISDN phone number in a dial out command will
be used as the destination EAZ (in the Destination Address W-
element) in the SETUP message sent to the destination. If this suffix
digit is omitted, the switch will assume the EAZ is 0.
- User’s Manual 1
- ZyXEL Limited Warranty 2
- FCC Part 15 Information 3
- Contacting ZyXEL 5
- Contents 7
- 1 Introduction 13
- Key to Model Differentiation 14
- Key Features of the omni 14
- Intelligent Features 15
- Technical Specifications 15
- Unpacking Your omni 16
- 6 Introduction 18
- 2 Installing omni External 19
- Back Panel 21
- Connecting to Your Computer 22
- Connecting to Your ISDN Line 24
- Power On and Self Diagnostics 25
- 3 Installing omni Internal 27
- Connecting the TA to your PC 28
- Plug and Play 28
- U Interface Model 31
- S/T Interface 31
- 4 Configuring Your ISDN 33
- 5 ISDN Communication 37
- Supported AT command types: 38
- Outgoing Calls 39
- Internal) 40
- Incoming Calls 41
- Digital Data 42
- Determining the Packet Length 42
- Answering a Call using MSN 43
- Data over Speech Channel 45
- 6 Setup for Windows 95 47
- Networking 50
- CAPI Installation 54
- 7 Point-to-Point Protocol 56
- Feature list 57
- Multilink PPP 59
- Call bumping 59
- Bandwidth On Demand (BOD) 60
- BACP/BAP 61
- 8 V.110 and Synchronous 63
- Making V.110 Calls 64
- V.25bis Command Set 65
- DTR Drop-Dialing Operation 66
- 9 V.120 ISDN 69
- Configuring the V.120 mode 70
- Answering incoming calls 71
- Speeds of 128Kbps 72
- ISDN (1TR6) 75
- 64 V.120 ISDN Communications 76
- 10 X.75 ISDN 77
- Answering an X.75 call 78
- Making an X.75 Call 78
- 70 X.75 ISDN Communications 82
- 11 Handling Analog Calls 83
- Accepting an Incoming Call 85
- Feature Phone (omni.net) 87
- Call Waiting 88
- Placing a second call 88
- Receiving a second call 88
- Call Broker 89
- Call Reject 89
- Call Transfer 89
- Three-way Conference Call 89
- 12 Advanced ISDN Call 91
- AT&ZOx=s. The 93
- Answering a Call 97
- Answering a Call for 1TR6 98
- Best-effort Call Answering 98
- Data Call Indication 99
- RING <CR><LF> 100
- Placing a Call 101
- Placing a call for 1TR6 102
- Leased Line ISDN 103
- 13 Security Functions 105
- Level 1 security 106
- Level 2 security 106
- Level 3 security 106
- Security Functions 97 109
- 14 Upgrading Your omni 110
- Kernel Mode 111
- 15 Diagnostics 112
- Power-on Self-test 113
- The Diagnostic Command (ATCG) 114
- Resetting The omni 115
- Capturing the Protocol Data 116
- Analyzing the Captured Data 117
- Diagnostics 107 119
- 16 AT Command Set 120
- AT Command Descriptions 121
- Description of ATI3 Output: 129
- 124 AT Command Set Reference 136
- 17 Status Registers and 137
- Setting S-registers 138
- S-Register Descriptions 139
- ATS35.7=1<enter> 160
- 18 Phone Jack Pinout 162
- 4. Not Connected 163
- 19 Serial Port Interface 164
- 20 Index 166
- Index 155 167
- Bundled, 62 167
- 156 Index 168
Relacionado con productos y manuales para Los Dispositivos De Acceso Rdsi ZyXEL ACCESSING INTERNET & INTRANET omni series
(8 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales