ZyXEL ACCESSING INTERNET & INTRANET omni series Manual de usuario descargar pdf (Pagina 93)

Advanced ISDN Call Control 81

Example: ATS80.4=0 disables Low-Layer-Compatibility message

for Analog Port 2 (omni.net).

Control of ISDN Phone Number and Sub-address

The Calling-Party-Number information element identifies the origin

of a call, and the Called-Party-Number information element identifies

the destination of a call.

The Calling-Party-Subaddress information element identifies the

Subaddress associated with the origin of a call.

The Called-Party-Subaddress information identifies the Subaddress

of the destination call.

Each type of outgoing call can be assigned with one

Number/Subaddress pair by using the command AT&ZOx=s. The

possible values for x are as follows:

• x = I - for ISDN data calls.

• x = A - for the analog adapter 1 (non-data).

• x = B - for the analog adapter 2 (omni.net).

The number-Subaddress-string ‘s’ is defined as:

s = [[Yn][Nn]own-number][/[[Zn]own-Subaddress]/]

where Yn specifies the number type:

• Y0 - unknown (default if Yn is omitted).

• Y1 - international number.

• Y2 - national number.

• Y3 - network specific number.

• Y4 - subscriber number.

Nn is the identifier of numbering plan:

• N0 - unknown (default if Nn is omitted).

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 167 168

Sin comentarios

ZyXEL ACCESSING INTERNET & INTRANET omni series Manual de usuario Pagina 93