ZyXEL ACCESSING INTERNET & INTRANET omni series Manual de usuario Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
18 Installing omni Internal Models
8. If you have more than one card installed, use the arrow keys to
select the card you want to configure. When you have made your
selection press Enter.
9. From the Properties dialogue box press Enter, select the desired
port, and press Enter again.
10. To change the IRQ arrow down and press Enter, choose the
desired IRQ and press Enter.
11. Press F2 to complete the configuration and save your settings, or
press Esc and type Y to abort.
Connecting to Your ISDN Line
The omni comes with a choice of two types of ISDN line interfaces:
S/T interface - This can only connect to your NT-1 (Network
Termination) device.
Warning: Do not under any circumstances connect directly to the ISDN
wall jack.
U interface - This allows you to connect directly to your ISDN
wall jack.
Warning: The ISDN jack is for ISDN line connection only. Connection of a
phone line may result in damage to your Terminal Adapter.
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 167 168

Comentarios a estos manuales

Sin comentarios