ZyXEL ACCESSING INTERNET & INTRANET omni series Manual de usuario descargar pdf (Pagina 84)

72 Handling Analog Calls (non-data)

AT Command Description

ATS84.5=1 use.

AT&ZIn=s MSN setting, assign Called phone number, “s,”

to be answered by “n” port (where n=6 for Phone

1 and n=7 for Phone 2).

AT&ZI6=s Assign the Called phone number for analog

adapter, Phone 1.

AT&ZI7=s Assign the Called phone number for analog

adapter, Phone 2.

ATS56=n Flash timer, in 100 ms unit, to set maximum

duration of ON-OFF hook transition to be

recognized as “Flash”.

European switch specific

ATS89.6=0 To disable the metering pulse for analog adapter,

Phone 1.

ATS89.6=1 To enable the metering pulse for analog adapter,

Phone 1.

ATS89.5=0 To disable the metering pulse for analog adapter,

Phone 2.

ATS89.5=1 To enable the metering pulse for analog adapter,

Phone 2.

Placing a Call from the Analog Adapter

Making a call from the analog adapter is as easy as picking up the

telephone connected to the analog port and dialing. With a terminal

program’s assistance you can also use the TA to dial the number for

you.

Type:

ATDB714-693-0808<Enter> (Dial the number)

TA responds:

CONNECT (Dialing is complete)

Now, just pick up the phone handset and wait for the remote device

to answer.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 167 168

Sin comentarios

ZyXEL ACCESSING INTERNET & INTRANET omni series Manual de usuario Pagina 84