ZyXEL Communications Modem n/a Manual de usuario descargar pdf (Pagina 96)

Chapter 15 LAN Interface Commands

DSL & IAD CLI Reference Guide

lan index <interface> Sets the LAN interface for configuration.

interface: type one of the following numbers

• 1 - to select the main LAN interface; in CLI this

interface is displayed as enif0.

• 2 - to select IP Alias #1 interface; in CLI this interface

is displayed as enif0:0.

• 3 - to select IP Alias #2 interface; in CLI this interface

is displayed as enif0:1.

• 4 - to select the DMZ interface; in CLI this interface is

displayed as enif0:2.

lan ipaddr <ip> <mask> Sets the LAN interface's IP address and subnet mask.

lan ippolicy <0-12> Applies the specified IP policy. “0” indicates no policy is

applied.

Policies can be configured via the ip policyrouting

set command.

lan multicast <none|igmpv1|igmpv2> Sets the multicast mode.

lan rip <none|in|out|both>

<rip1|rip2b|rip2m>

Sets the RIP direction and mode.

lan save Saves the LAN interface configuration in the working

buffer to non-volatile memory. The working buffer is a

volatile memory space. The settings in the working buffer

are not applied to the ZyXEL Device until you execute

this command.

Table 35 LAN Command Summary (continued)

COMMAND DESCRIPTION

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 221 222

Sin comentarios

ZyXEL Communications Modem n/a Manual de usuario Pagina 96