ZyXEL Communications Modem n/a Manual de usuario descargar pdf (Pagina 165)

Chapter 21 WAN Commands

DSL & IAD CLI Reference Guide

165

wan node display Displays configuration details of the previously-

specified WAN node currently in the working buffer.

wan node enable Activates the previously-specified WAN node

profile.

wan node encap

<1483|pppoa|pppoe|enet>

Sets the encapsulation method used by the

previously-specified WAN node profile.

<1483>: RFC1483

<pppoa>: Point-to-Point Protocol over ATM

<pppoe>: Point-to-Point Protocol over Ethernet

<enet>: Ethernet encapsulation.

wan node filter

<incoming|outgoing|call>

<tcpip|generic> <profile>

Specifies the filter action, type and profile to be used

for traffic to or from the previously-specified WAN

node profile.

incoming: the filter applies to traffic coming from

the WAN to the LAN.

outgoing: the filter applies to traffic coming from

the LAN to the WAN.

call: determines whether a packet should be

allowed to trigger a call.

tcpip: filters IP packets only.

generic: filters based on a packet’s MAC address.

profile: profile number 1 ~ 4. Use the sys

filter set commands to configure filter profiles.

wan node freememory Clears the WAN node information in the working

buffer.

Note: Use this command before working

on another WAN node profile.

wan node index <node#> Sets the node pointer to the specified WAN node

profile.

• 1 is the ISP node profile.

• 9 is the backup node profile.

Note: Use this command to specify the

node profile before using other wan

node commands.

wan node ippolicy <profile#> Sets the IP policy profile to be used by the

previously-specified WAN node profile.

profile#: profile number 0 ~ 12.

wan node ispname <name> Sets the ISP name for the node you previously

specified with the wan node index <node#>

command.

wan node mbs <mbs> Sets the Maximum Burst Size (MBS) of the

previously-specified WAN node profile.

wan node metric <metric> Sets the metric value (number of transmission hops)

of the previously-specified WAN node profile.

wan node mtu <512~1500> Sets the Maximum Transmission Unit (MTU) to

define the size of the largest packet allowed on the

specified WAN node.

Table 66 wan node Commands (continued)

COMMAND DESCRIPTION

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 221 222

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications Modem n/a Manual de usuario Pagina 165

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications Modem n/a