ZyXEL Communications Modem n/a Manual de usuario Pagina 176

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 222
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 175
Chapter 22 Wireless LAN Commands
DSL & IAD CLI Reference Guide
176
wcfg radius <1 ~ 8> primaryauth <IP>
<port-number> <shared-secret>
<enable|disable>
Sets the primary RADIUS authentication server
settings.
wcfg radius <1 ~ 8> save Saves the specified RADIUS policy.
wcfg radius <1 ~ 8> show Displays the specified RADIUS policy settings.
wcfg radius display [1 ~ 8] Displays the staus of all RADIUS policies or the
specified RADIUS policy.
wcfg radius saveall Saves all RADIUS policies.
wcfg radius spdisplay [1 ~ 8] Displays settings of all RADIUS policies or the
specified RADIUS policy before saving.
wcfg security <1 ~ 8> clear Removes the specified security profile.
wcfg security <1 ~ 8> groupkeytime
<10 ~ 65535>
Sets the rate at which the AP or RADIUS server
sends a new group key out to all clients
wcfg security <1 ~ 8> idletime <10 ~
65535>
Sets the time interval before the ZyXEL Device
automatically disconnects a wireless client from the
wired network after a period of inactivity.
wcfg security <1 ~ 8> mode
<security-mode>
Sets the security mode of the specified security
profile.
security-mode: none | wep | wpa |
wpapsk | wpa2 | wpa2mix | wpa2psk |
wpa2pskmix
wcfg security <1 ~ 8> name <policy-
name>
Sets the name of the specified security profile.
wcfg security <1 ~ 8> passphrase
<passphrase>
Sets the passphrase for the wpapsk, wpa2psk, and
wpa2pskmix security modes.
passphrase: Types a pre-shared key from 8 to 63
case-sensitive ASCII characters.
wcfg security <1 ~ 8> reauthtime <10
~ 65535>
Sets how often wireless stations have to re-send
usernames and passwords in order to stay
connected.
wcfg security <1 ~ 8> save Saves the specified security profile.
wcfg security <1 ~ 8> show Displays the specified security profile settings.
wcfg security <1 ~ 8> wep auth
<shared|auto>
Sets the WEP authentication method for this
security profile.
wcfg security <1 ~ 8> wep <key1 ~
key4> <key-string>
Sets the WEP key used to encrypt data for this
security profile.
key-string: Enters any 5, 13 or 16 characters
(ASCII string) or 10, 26 or 32 hexadecimal
characters ("0-9", "A-F") for a 64-bit, 128-bit or 152-
bit WEP key respectively.
wcfg security <1 ~ 8> wep keyindex
<1 ~ 4>
Sets a default WEP key to use for data encryption.
wcfg security <1 ~ 8> wep keysize
<64|128|152> <ascii|hex>
Sets the size and type of the WEP key(s) in this
security profile.
wcfg security display [1 ~ 8] Displays the staus of all security profiles or the
specified security profile.
wcfg security saveall Saves all security profiles.
Table 69 General Wireless Commands (continued)
COMMAND DESCRIPTION
Vista de pagina 175
1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 221 222

Comentarios a estos manuales

Sin comentarios