
Chapter 5 WAN
FSG1100HN User’s Guide
5.4 WAN for Static IP Screen
Select Static IP if the WAN port IP information is provided by the ISP. Users will need
to enter the IP address, subnet mask, gateway address, and DNS(es) provided by the
ISP.
Click Networking > WAN > Static IP to open the WAN screen for Static IP.
Networking > WAN > Static IP
The following table describes the WAN static IP labels in this screen.
Networking > WAN > Static IP
Type
Choose Static IP. The other options are DHCP Client or PPPoE.
The WAN IP address is an IP address for the FSG1100HN, which
makes it accessible from an outside network. It is used to
communicate with other devices on other networks.
If this static WAN IP address has been assigned by the ISP, it
should also assign the subnet mask and DNS server IP
address(es). A default gateway IP address may also be provided.
Gateway
Enter the default gateway IP address.
Enter the DNS server IP address(es) assigned by the ISP.
Address
Enable MAC address cloning.
Enable the Universal Plug and Play (UPnP) feature. Universal Plug
and Play (UPnP) is a distributed, open networking standard that
Comentarios a estos manuales