ZyXEL Communications Network Router wireless n gigabit netusb router Manual de usuario descargar pdf (Pagina 83)

Chapter 11 Universal Repeater Mode

NBG4615 User’s Guide

11.3 What You Need to Know

With the exception of the Wireless LAN > AP Client screen, other configuration screens in

Universal Repeater mode are similar to the ones in Access Point Mode. See Chapter 15 on page 125

through Chapter 29 on page 221 of this User’s Guide.

11.4 Setting your NBG4615 to Universal Repeater Mode

1 Connect your computer to the LAN port of the NBG4615.

2 The default IP address of the NBG4615 is “192.168.1.2”. In this case, your computer must have an

IP address in the range between “192.168.1.3” and “192.168.1.254”.

3 Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to

show your computer’s IP address. If your computer’s IP address is not in the correct range then see

Appendix D on page 259 for information on changing your computer’s IP address.

4 After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and

type “http://192.168.1.2” as the web address in your web browser.

5 Enter “1234” (default) as the password and click Login.

6 Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.

7 The Easy mode appears. Click Expert Mode in the navigation panel.

8 To set your NBG4615 to Universal Repeater Mode, on the left of the screen, click Maintenance

> Sys OP Mode and select Universal Repeater Mode.

Figure 53 Changing to Universal Repeater mode

Note: You have to log in to the Web Configurator again when you change modes. As soon

as you do, your NBG4615 is already in Universal Repeater mode.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 359 360

Sin comentarios

ZyXEL Communications Network Router wireless n gigabit netusb router Manual de usuario Pagina 83