ZyXEL P-660R-11V3 Manual de usuario Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 222
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
Chapter 8 LAN Setup
P-660R-T1 v3 User’s Guide
71
The following table describes the labels in this screen.
8.3 LAN Technical Reference
This section provides some technical background information about the topics covered in this
chapter.
8.3.1 LANs, WANs and the ZyXEL Device
The actual physical connection determines whether the ZyXEL Device ports are LAN or
WAN ports. There are two separate IP networks, one inside the LAN network and the other
outside the WAN network as shown next.
Figure 30 LAN and WAN IP Addresses
8.3.2 DHCP Setup
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the ZyXEL
Device as a DHCP server or disable it. When configured as a server, the ZyXEL Device
provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must
have another DHCP server on your LAN, or else the computer must be manually configured.
Table 18 Interface Setup > LAN > DHCP IP Pool Summary
LABEL DESCRIPTION
Host Name This field displays the name of a computer that receives an IP address from the
ZyXEL Device.
IP Address This field displays the IP address of a computer that receives an IP address
from the ZyXEL Device.
MAC Address This field displays the MAC address of a computer that receives an IP address
from the ZyXEL Device.
WAN
LAN
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 221 222

Comentarios a estos manuales

Sin comentarios