ZyXEL P-2302R-P1C Manual de usuario descargar pdf (Pagina 39)

P2302R-P1C Support Notes

All contents Copyright  2007 ZyXEL Communications Corporation.

 Apply the first filter set 'NetBIOS_WAN' to the 'Output Protocol Filter' in the remote node

setup.

Configure the second filter set 'NetBIOS_LAN' by selecting the Filter Set number 2.

 Rule 1-Source port number 137, Destination port number 53 with protocol number 6 (TCP)

Menu 21.2.1 - TCP/IP Filter Rule

Filter #: 2,1

Filter Type= TCP/IP Filter Rule

Active= Yes

IP Protocol= 6 IP Source Route= No

Destination: IP Addr= 0.0.0.0

IP Mask= 0.0.0.0

Port #= 53

Port # Comp= Equal

Source: IP Addr= 0.0.0.0

IP Mask= 0.0.0.0

Port #= 137

Port # Comp= Equal

TCP Estab= No

More= No Log= None

Action Matched= Drop

Action Not Matched= Check Next Rule

Press ENTER to Confirm or ESC to Cancel:

 Rule 2-Source port number 137, Destination port number 53 with protocol number 17 (UDP)

Menu 21.2.2 - TCP/IP Filter Rule

Filter #: 2,2

Filter Type= TCP/IP Filter Rule

Active= Yes

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 144 145

Sin comentarios

ZyXEL P-2302R-P1C Manual de usuario Pagina 39